1993 Buick Park Avenue Keyless Entry Remote Fob Smart Key Programming Instructions

Description
1993 Buick Park Avenue Keyless Entry Remote Fob Smart Key Programming Instructions

DATA LINK CONNECTOR

 

1.     Locate the Data Link Connector (DLC) underneath the driver's side dashboard.  Use the figure as a map for your DL (They are not lettered on your vehicle.)  The view is looking straight into the cavities of the DLC.
 

2.     Connect cavity G with cavity A using a fused jumper wire.  Your vehicle will respond by locking and unlocking the door locks within 2 seconds.
 

3.     Press any button on first remote to be programmed.  Locks will lock and unlock verifying remote was programmed.
 

4.     Press any button on second remote to be programmed if applicable.  Locks will lock and unlock to verify remote was programmed.
 

5.     Remove jumper wire and test remote(s)

 



   Can I Program an ignition key for this vehicle?
      Click Here ProgramAutoKeys.com 

Call 855-530-0617 to find a Locksmith in your area to program this remote or go to LocateALocksmith.com to find one in your area.
 
 
 
 
 
Need car remotes? Replace for less at CarandTruckRemotes.com