1996 Buick Roadmaster Keyless Entry Remote Fob Smart Key Programming Instructions

Call 888-934-0219 if you need a Locksmith to cut or program this remote or you can go to LocateALocksmith.com to find one in your area.
Description

1996 Buick Roadmaster Keyless Entry Remote Fob Smart Key Programming Instructions

1.  Locate the programming connector located in the LH trunk. Trim may have to be pulled back to access programming connector. (Connector has black/white wires leading up to it and it is not connected to anything.)
 

2.  Jump programming connector terminals. Leave terminals jumped unitl step 6.

3.  System should now lock and unlock doors to indicate programming mode has been entered. 

4.  Press any button on keyless remote once.  System should now lock and unlock doors, indicating successful programming of keyless remote.  

5.  Repeat step 4 for additional remote or other existing keyless remote.  NOTE: A maximum of only two Keyless Remotes can be programmed.

6.  Remove programming connector jumper wire to exit programming mode.

7.  Test remote(s).


 

   Can I Program an ignition key for this vehicle?
      Click Here ProgramAutoKeys.com 


Call 844-842-7357 to find a Locksmith in your area to program this remote or go to LocateALocksmith.com to find one in your area.