1998 Lexus ES300 Keyless Entry Remote Fob Smart Key Programming Instructions

Description

1998 Lexus ES300 Keyless Entry Remote Fob Smart Key Programming Instructions

1. Start with key out of ignition, drivers door is open all others closed and 
    drivers door is unlocked.
 

2. Insert key into the ignition (Do NOT Turn) and Pull key out.

3. Perform these steps within 40 seconds.
    A. Using the power lock switch on the drivers door, perform 5 lock/unlock cycles
        starting with lock. Use an even pace and try to go about one cycle per second.
        (1Cycle  = 1 lock and 1 unlock).
    B. Close, then open drivers door.

4. Perform these steps within 40 seconds.
    A. Using the power lock switch on the drivers door, perform 5 lock/unlock cycles
        starting with lock. Use an even pace and try to go about one cycle per second.
         (1Cycle  = 1 lock and 1 unlock).
    B. Insert the key in the ignition cylinder.
    C. Turn the ignition to ON (Do NOT Start) then back to OFF.
    D. Remove the key from the ignition.

5. Press any button on remote for a minimum of 1 second.
    System should now lock and unlock doors once.

6. Close and open drivers door.

7. Press any button on remote for a minimum of 1 second. System should now lock and
    unlock doors. Once to confirm programming, twice to indicate programming failed.

8. Repeat steps 5, 6 and 7 for additional remotes.

    

Video
Call 855-530-0617 to find a Locksmith in your area to program this remote or go to LocateALocksmith.com to find one in your area.