2001 Mazda Miata

Call 888-934-0219 if you need a Locksmith to cut or program this remote or you can go to LocateALocksmith.com to find one in your area.
Description
  1. Remove key from ignition.
     
  2. Close all doors.
     
  3. Open driver side door and leave open.
     
  4. Perform the following steps within 24 seconds.
    a. Insert key in ignition.
    b. Turn key to ON and OFF.
    c. Repeat step b two more times.
    d. Remove key.
    e. Push driver door frame button three times (black rubber button located on
        driver door frame that tell the vehicle whether or not door is closed.)
     
 

       5.  Buzz sound, chime or doors will lock and unlock should be heard at this point
            signaling that the vehicle is now  in programming mode. If not, wait 40
            seconds and return to step 4.
 

 

       6.  All transmitters need to be programmed at this time, including the old ones.
            Push any button on the transmitter two times. A buzz sound, chime or doors
            locking and unlocking should be heard at this point signaling that the vehicle
            has accepted the new transmitter code. If there is only one transmitter,
            repeat this step two more times using the only transmitter. If there are two
            transmitters, repeat this step two more times using the second transmitter.
 

       7.  Push driver door frame button one time. Two buzz sounds, chimes or doors
            locking and unlocking 2 times should be heard at this point signaling
            successful programming.


              Disclaimer


Call 844-842-7357 to find a Locksmith in your area to program this remote or go to LocateALocksmith.com to find one in your area.