2002 Pontiac Montana Keyless Entry Remote Fob Smart Key Programming Instructions

Description

2002 Pontiac Montana Keyless Entry Remote Fob Smart Key Programming Instructions 

IMPORTANT: Before entering programming mode, have in possession all of the remotes you will be using on the vehicle. Once you program the remote. all previous remotes that were programmed will be erased from memory. The other remotes will not be functional until you program the them again.
 

1. Remove the key from the ignition.

2. Remove the "BCM PRGRM" fuse from the fuse panel. Use the legend on the fuse panel to properly locate the "BCM PRGRM" fuse. Fuse panel is accessed by opening the front  passenger door.

3. Close all of the doors.

4. Close the lift gate.

5. Insert the key into the ignition, and turn to the ACC position.

6. Turn the key to OFF and then back to ACC within 1 second.

7. Open and close any vehicle door. A chime will be heard when the system enters into programming mode.

8. Press and hold the remote LOCK and UNLOCK buttons simultaneously for 14 seconds. IMPORTANT: After 7 seconds, a chime may be heard confirming successful  synchronization. It is necessary to wait approximately 14 seconds for a second chime that will confirm successful programming.

9. Repeat step 8 now for each additional remotes to be programmed including any existing remotes.

10. Remove key from ignition.

11. Install the "BCM PRGRM" fuse back into the fuse panel and test remote(s).



   Can I Program an ignition key for this vehicle?
      Click Here ProgramAutoKeys.com 

Call 844-842-7357 to find a Locksmith in your area to program this remote or go to LocateALocksmith.com to find one in your area.