2006 Mazda RX8

Call 888-934-0219 if you need a Locksmith to cut or program this remote or you can go to LocateALocksmith.com to find one in your area.
Description

RX-8 with out Smart Entry System

1.  Remove key from ignition

2.  Close all doors.

3.  Open drivers door.

4.  Perform following steps within 24 seconds.
     A. Turn ignition switch ON and back to LOCK position three times
     B. Close and open drivers door three times
     C. Door locks should lock and unlock automatically, if they do not wait
         40 seconds and repeat procedure starting at step 1.

5.  Press UNLOCK button of each keyless remote to be progammed twice,
     door locks should lock and unlock after each remote is programmed.
     If door locks do not lock and unlock proceed as follows.
     A. Close and open drivers door once, door should lock and unlock twice.
         If door locks do not lock and unlock, start  procedure over with step 3.

6.   Exit vehicle and test remote(s)

     


Call 844-842-7357 to find a Locksmith in your area to program this remote or go to LocateALocksmith.com to find one in your area.