2007 Chevrolet Equinox Keyless Entry Remote Key Fob Programming Instructions

Call 888-934-0219 to find a Locksmith in your area to program this remote or go to LocateALocksmith.com to find one in your area.
Description

Follow these free keyless entry remote key fob programming instructions for 2007 Chevrolet Equinox. 

 
Use this Procedure for Vehicles with
Driver Information Center Buttons


This information is in your Owners Manual in the
Drivers Information Center Section.

1. Insert Key and turn to ON position so you can access Driver Information Center

2. Press the vehicle information button until PRESS TO RELEARN REMOTE KEY displays 

3. Press the set/reset button until REMOTE KEY LEARNING ACTIVE  displays

4.  Press and hold the lock and unlock buttons on the first keyless remote at the same time for approximatley 15 seconds. A chime will sound indicating that the remote is programmed.


5.  To program additional remotes at this time repeat step 3. This vehicle can have a maximum of eight remotes programmed.

6.  To exit programming mode turn key off and remove key. Test remote(s).


Use this Procedure for Vehicles without
Drivers Information Center Buttons

To access this display, the vehicle must be in Park (P) with key in the on position (as far as you can go without cranking engine)

1. Press the trip odometer reset stem until RELEARN REMOTE KEY displays. 

2. Press and hold the trip odometer reset stem for three seconds. The message  REMOTE KEY LEARNING ACTIVE  will display 

3.  Press and hold the lock and unlock buttons on the first keyless remote at the same time for approximately 15 seconds. A chime will sound indicating that the remote is programmed.

4.  To program additional remotes at this time repeat step 3. This vehicle can have a maximum of eight remotes programmed.

5.  To exit programming mode turn key off and remove key. Test remote(s).

If you need a Locksmith to program this remote or for any other locksmith needs please call Toll Free 855-899-6729 to find one in your area.
 
     Disclaimer

   Can I Program an ignition key for this vehicle?
      Click Here
ProgramAutoKeys.com 


Call 844-842-7357 to find a Locksmith in your area to program this remote or go to LocateALocksmith.com to find one in your area.