Click Here Now!

2007 Ford F150-250

Note: It is necessary to have all of your keyless remotes available prior to beginning
          this procedure. All keyless remotes not present during the programming
          procedure will not work when the programming procedure has been competed.

1.  DO NOT depress brake pedal during this programming procedure.

2.  Unlock all doors using the power door lock switch on door panel.

3.  Turn ignition from OFF to RUN 8 times within 10 seconds, with the 8th time ending in 
     RUN. Door locks will cycle to confirm programming mode.

4.   Within 20 seconds press any button on first keyless remote. Door locks will cycle
      to confirm programming.

5.   Within 20 seconds, press any button on second keyless remote. Door locks will
      cycle again to confirm programming.

6.   Turn ignition to OFF. Locks will again cycle to indicate end of programming mode.

     Disclaimer


  Now that you have programmed your keyless remote.
  Click below for instructions to program an ignition key.

 
ProgramAutoKeys.com