2008 Toyota Yaris Keyless Entry Remote Fob Smart Key Programming Instructions

Call 888-934-0219 if you need a Locksmith to cut or program this remote or you can go to LocateALocksmith.com to find one in your area.
Description
2008 Toyota Yaris keyless entry remote fob smart key programming instructions.

These instructions are for the remote portion of the Key/Remote combo only. Key portion will still need to be cut and programmed if it requires a transponder chip. 

Call Toll Free 855-899-6729 to find a locksmith in your area to program this remote.  


 1- Drivers door open & unlocked. Key out of ignition
 2- Insert & remove key 2 times within 5 seconds
 3- Close & open drivers door twice within 40 seconds
 4- Insert key into ignition & remove
 5- Close & open drivers door twice within 40 seconds
 6- Insert key into ignition
 7- Close the door
 8- Turn ignition switch from "LOCK" to "ON" & back to "LOCK"
      - ONCE for ADD mode
      - TWICE for REWRITE mode
 9- Remove the key from ignition
10- To confirm your mode selection, the power locks will now cycle "lock" to "unlock" a number of times corresponding to your key cycles in step 8
11- Within 40 seconds of confirmation
      - Press both transmitter Lock & Unlock buttons simultaneously
      - Within 3 seconds press transmitter Lock button for more than 1 second
      - If successful, the power locks will cycle once (twice indicates transmitter problems)
      - Repeat step 11 for additional remotes
12- Open door to exit programing

         Disclaimer


Call 844-842-7357 to find a Locksmith in your area to program this remote or go to LocateALocksmith.com to find one in your area.