1991 Infiniti G20 Keyless Entry Remote Fob Programming Instructions

Call 877-675-1507 for a local Locksmith
How to Program a 1991 Infiniti G20 Keyless Entry Remote Fob

Step by Step How to Programming Instructions:
(1) Open the trunk.
(2) Close and lock all doors.
(3) Insert and remove the key from the ignition six times within 10 seconds.
(4) Manually unlock and lock driver's door once to enable "Belting" mode.
(5) Push lock button on the new remote controller once, within 5 seconds of completing step 4.
(6) If additional remotes are needed, repeat steps 4 and 5 for each additional remote immediately after  programming the first remote.

NOTE: a total of four (4) remotes can be programmed to function on the same vehicle.