1992 Oldsmobile Eighty Eight Keyless Entry Remote Fob Programming Instructions

Instructions
How to Program a 1992 Oldsmobile Eighty Eight Keyless Entry Remote Fob 

Step by Step How to Programming Instructions: 

 
DATA LINK CONNECTOR

 

1.  Locate the Data Link Connector (DLC) underneath the driver's side dashboard. Use the figure as a map for your DLC ( They are not lettered on your vehicle.) The view is looking straight into the cavities of the DLC.
 

2.  Connect cavity G with cavity A using a fused jumper wire.  Your vehicle will respond by locking and unlocking the door locks within 2 seconds.
 

3.  Press any button 3 times in succession on first remote to be programmed.  Locks will lock and unlock verifying remote was programmed.
 

4.  Press any button 3 times in succession on second remote to be programmed if applicable.  Locks will lock and unlock to verify remote was programmed.
 

5.  Remove jumper wire and test remote(s)

 
 
Can I Program an ignition key?  ProgramAutoKeys.com