How to Program a 1996 Nissan 300zx Keyless Entry Remote Fob
Step by Step How to Program Instructions:
(1) Open the trunk.
(2) Close and lock all doors.
(3) Insert and remove the key from the ignition six times within 10 seconds.
(4) Manually unlock and lock driver's door once to enable "Belting" mode.
(5) Push lock button on the new remote controller once, within 5 seconds of completing step 4.
(6) If additional remotes are needed, repeat steps 4 and 5 for each additional remote immediately after programming the first remote.
NOTE: a total of four (4) remotes can be programmed to function on the same vehicle.