1997 Ford Probe Keyless Entry Remote Fob Programming Instructions

Call 877-675-1507 for a local Locksmith
Instructions
How to Program a 1997 Ford Probe Keyless Entry Remote Fob 

Step by Step How to Program Instructions:


1. Turn ignition to RUN or ACC.

2. Momentarily jump pins in programming connector located in right rear quarter panel area.  All doors will lock then unlock to confirm programming mode.

3. Press any button on first keyless remote. Door locks will cycle to confirm programming.

4. If programming a second keyless remote, press any button on second keyless remote.  Door locks will cycle to confirm programming.

5. Turn ignition to OFF. Locks will again cycle to indicate end of programming mode.