2003 Mazda B-Series Keyless Entry Remote Fob Smart Key Programming Instructions

2003 Mazda B Series Keyless Entry Remote Fob Smart Key Programming Instructions

1. Close all doors and then open drivers door and press the UNLOCK button on drivers door panel while door is open and insert key in ignition.
2. Turn ignition from OFF to Run 8 times within 10 seconds, with the 8th time ending in RUN. Door locks will cycle to confirm programming mode.


3. Within 20 seconds press any button on first keyless remote.  Door locks will cycle to confirm programming.

4. Within 20 seconds, press any button on second keyless remote.  Door locks will cycle again to confirm programming.


5. Turn ignition to OFF.  Locks will again cycle to indicate end of programming mode.


  Now that you have programmed your keyless remote.
  Click below for instructions to program an ignition key.


Call 855-530-0617 to find a Locksmith in your area to program this remote or go to LocateALocksmith.com to find one in your area.
Our free programming instruction disclaimer can be found on the ProgramYourRemote disclaimer page.