2005 Honda Odyssey Keyless Entry Remote Fob Programming Instructions

Instructions
How to Program a 2005 Honda Odyssey Keyless Entry Remote Fob

Step by Step How to Programming Instructions:
 
1. Turn ignition switch to ON (II)
 

2. Within 4 seconds  press the LOCK or UNLOCK button on one of the remotes. Make sure remote is aimed at the receiver near the glove box.

3. Within 4 seconds turn ignition switch to LOCK (0)

4. Repeat steps 1, 2 and 3 two more times using the same keyless remote used in step 2.

5. Within 4 seconds turn the ignition switch to ON (II)

6. Within 4 seconds press the LOCK or UNLOCK button the same remote. Make sure the power door locks cycle to confirm you are in programming mode. Press the LOCK or UNLOCK button again.

7. Press the LOCK or UNLOCK button on each remote you want to program. Make  sure door locks cycle after you push each remote button to confirm system has accepted the remote.

8. Turn the ignition switch to LOCK (0) to exit programming mode.

9. Test remote(s). 

 
Call (877) 675-1507 for a Locksmith in your area.