2007 Cadillac DTS Keyless Entry Remote Fob Smart Key Programming Instructions

Call 877-675-1507 for a local Locksmith

How to Program a 2007 Cadillac DTS Keyless Entry Remote Fob Smart Key 

Step by Step How to Program Instructions:

1. Insert Key and turn to ON position so you can access Driver Information Center

2. Press the vehicle information button until PRESS TO RELEARN REMOTE KEY displays 

3. Press the set/reset button until REMOTE KEY LEARNING ACTIVE  displays

4. Press and hold the lock and unlock buttons on the first keyless remote at the same time for approximately 15 seconds. (On vehicles with memory recall seats, the first remote learned with match driver 1 and the second will match driver 2.)  A chime will sound indicating that the remote is programmed.

5. To program additional remotes at this time repeat step 4.  T
his vehicle can have a maximum of eight remotes programmed.

6. To exit programming mode turn key off and remove key.  Test remote(s).

Can I Program an ignition key? ProgramAutoKeys.com