2007 Chrysler Town & Country Keyless Entry Remote Fob Smart Key Programming Instructions

Print Instruction
Instructions
How to Program a 2007 Chrysler Town & Country Keyless Entry Remote Fob Smart Key

Step by Step How to Programming Instructions:

  1. CUT the NEW remote head key for your vehicle.

  2. INSERT the first working remote head key into the Ignition.
  3. TURN the Ignition to the ON position for at least three (3) seconds but no longer than fifteen (15) seconds.

  4. TURN the Ignition to the OFF position and remove the first remote head key.

  5. INSERT the second working remote head key into the Ignition.

  6. TURN the Ignition to the ON position for at least three (3) seconds but no longer than fifteen (15) seconds.

  7. After ten (10) seconds a chime will sound and the vehicle’s security light will begin to flash.

  8. TURN the Ignition to the LOCK position and REMOVE the second remote head key.

  9. INSERT the NEW remote head key into the Ignition.

  10. TURN the Ignition to the ON position within 60 seconds.

  11. After ten (10) seconds a single chime will sound and the vehicle’s security light will stop flashing.

  12. The vehicle’s security light will turn ON again for three (3) seconds and OFF to indicate successful programming.

  13. Test all remotes. Programming is now complete. The remote and key are now both programmed.
 
 
Call (877) 675-1507 to find a Locksmith in your area.
 
 
 
 
Home | Contact Us | Disclaimer | Privacy Policy