2008 Dodge Nitro Keyless Entry Remote Fob Smart Key Programming Instructions

Call 877-675-1507 for a local Locksmith
Instructions
How to Program a 2008 Dodge Nitro Keyless Entry Remote Fob Smart Key  

Step by Step How to Programming Instructions:

 

**This procedure CAN ONLY be used on vehicles built in USA.
 

**You MUST HAVE two working programmed Remote/keys before you can add a third remote/key.

**If you only have ONE WORKING REMOTE/KEY and want to add a second key this procedure WILL NOT WORK.

1.  Using first programmed remote/key turn ignition to the ON position for 5 seconds. (Do not crank engine). Turn remote/key off and remove.

2.  Within 5 seconds insert second working programmed remote/key. Turn ignition to the ON position (Do not crank engine) security light will begin to flash and chime will be heard within 10 seconds. Turn remote/key off and remove. NOTE: Some vehicles will not chime, only the security light will flash.

3.  Within 5 seconds insert third NEW CUT remote/key and turn ignition to the ON  position (Do not crank engine). The security light should start flashing and within 10 seconds you should hear a chime and the security light should go out. Once the security light goes out, the new remote/key should be programmed. Turn remote/key to the OFF position, remove key.

4.  Test key and remote.

**If you only have ONE WORKING REMOTE/KEY and want to add a second key, Click Here to Buy Programmer.
 
**If you have no working keys. Click Here to Locate A Locksmith in your area.
Video