2010 Toyota Corolla Keyless Entry Remote Fob Smart Key Programming Instructions

Instructions
2010 Toyota Corolla keyless entry remote fob smart key programming instructions.
 

There is no manual on board procedure to program a keyless remote to this vehicle if it has this style remote smart key. This vehicle requires special equipment be connected to the vehicle to program the remote.

 



If your Corolla has this style remote key you can program the remote portion of the remote key but you will need to have a Locksmith program the key portion.
 
IF TEN SECONDS OR MORE ELAPSE BETWEEN ANY OF THE FOLLOWING STEPS,YOU WILL NEED TO START ALL OVER AGAIN.PREPARE VEHICLE BY CLOSING AND LOCKING ALL DOORS EXCEPT DRIVER'S DOOR SHOULD BE OPEN AND UNLOCKED.

1)STICK KEY IN AND OUT OF THE IGNITION CYLINDER TWICE WITHOUT TURNING IT.

2)CLOSE AND OPEN DRIVER'S DOOR TWICE ENDING IN OPEN DOOR.

3)STICK KEY IN AND OUT OF THE IGNITION CYLINDER ONCE WITHOUT TURNING IT.

4)CLOSE AND OPEN DRIVER'S DOOR TWICE ENDING IN OPEN DOOR.

5)STICK THE KEY IN THE IGNITION CYLINDER.(DO NOT REMOVE OR TURN KEY)

6)CLOSE DRIVER'S DOOR.

7)TURN THE KEY IN THE IGNITION ON AND OFF TWICE AND REMOVE KEY FROM THE IGNITION.
(AT THIS POINT IF EVERY STEP WAS DONE CORRECTLY,ALL DOORS WILL LOCK AND UNLOCK TWICE TO LET YOU KNOW THE SYSTEM ENTERED THE ADD MODE)

8)PRESS BOTH LOCK AND UNLOCK BUTTONS ON YOUR REMOTE SIMULTANEOUSLY FOR ONE SECOND.

9)WITHIN THREE SECONDS PRESS THE LOCK BUTTON ON YOUR REMOTE FOR ONE SECOND AND RELEASE.
(VEHICLE WILL BEEP TWICE TO LET YOU KNOW IT HAS ACCEPTED THE NEW REMOTE.)
TO EXIT ADD MODE OPEN AND CLOSE DOOR AND TEST REMOTE OPERATION.
 
 
Call (877) 675-1507 to find a Locksmith in your area.