2011 Toyota Yaris Keyless Entry Remote Fob Smart Key Programming Instructions

Call 877-675-1507 for a local Locksmith
Instructions
How to Program a 2011 Toyota Yaris Keyless Entry Remote Fob Smart Key
 
Step by Step How to Programming Instructions:
 

These instructions are for the remote portion of the Key/Remote combo only. Key portion will still need to be cut and programmed if it requires a transponder chip. 

 1- Drivers door open & unlocked. Key out of ignition
 2- Insert & remove key 2 times within 5 seconds
 3- Close & open drivers door twice within 40 seconds
 4- Insert key into ignition & remove
 5- Close & open drivers door twice within 40 seconds
 6- Insert key into ignition
 7- Close the door
 8- Turn ignition switch from "LOCK" to "ON" & back to "LOCK"
      - ONCE for ADD mode
      - TWICE for REWRITE mode
 9- Remove the key from ignition
10- To confirm your mode selection, the power locks will now cycle "lock" to "unlock" a number of times corresponding to your key cycles in step 8
11- Within 40 seconds of confirmation
      - Press both transmitter Lock & Unlock buttons simultaneously
      - Within 3 seconds press transmitter Lock button for more than 1 second
      - If successful, the power locks will cycle once (twice indicates transmitter problems)
      - Repeat step 11 for additional remotes
12- Open door to exit programming