This site uses cookies. Some are essential to make our site work; others help us improve the user experience.
By using the site, you consent to the use of these cookies.
Read our
Privacy Policy
to learn more.
I Agree
Vehicle Make
Acura
Audi
BMW
Buick
Cadillac
Chevrolet
Chrysler
Dodge
Ford
Genesis
GMC
Honda
Hummer
Hyundai
Infiniti
Isuzu
Jaguar
Jeep
Kia
Land Rover
Lexus
Lincoln
Mazda
Mercury
Mitsubishi
Nissan
Oldsmobile
Plymouth
Polestar
Pontiac
Ram
Saturn
Scion
Subaru
Suzuki
Toyota
Volkswagen
Volvo
Information
Home
YouTube
Disclaimer
Privacy Policy
2012 Ford F150 Keyless Entry Remote Fob Smart Key Programming Instructions
Call 877-675-1507 for a local Locksmith
Print Instruction
Instructions
How to Program a 2012 Ford F150 Keyless Entry Remote Fob Smart Key
Step by Step How to Program Instructions:
You must have two previously programmed keys and the new unprogrammed key readily accessible. If you do not have two previously programmed keys you will need a
Locksmith
to cut and program a second key.
1. Insert the first previously programmed key into the ignition.
2. Switch the ignition from off to on. Keep the ignition on for at least three seconds, but no more than 10 seconds.
3. Switch the ignition off and remove the first programmed key from the ignition.
4. After three seconds but within 10 seconds of switching the ignition off, insert the second previously programmed key into the ignition.
5. Switch the ignition from off to on. Keep the ignition on for at least three seconds, but no more than 10 seconds.
6. Switch the ignition off and remove the second previously programmed key from the ignition.
7. After three seconds but within 10 seconds of switching the ignition off and removing the previously programmed key, insert the new unprogrammed key into the ignition.
8. Switch the ignition from off to on. Keep the ignition on for at least six seconds.
9. Remove the newly programmed key from the ignition. If the key has been successfully programmed it will start the engine and operate the remote entry system (if the new key is an integrated keyhead transmitter). If it was not programmed successfully, wait 10 seconds and repeat Steps 1 through 8.
If you only have one working key you can buy a programmer.
Click Here to Buy Programmer.
Video
Click Here to Find Your Key Fob on Amazon
Click Here to Find Your Key Fob Battery on Amazon
Home
|
Disclaimer
|
YouTube
|
Privacy Policy
Copyright © 2025
ProgramYourRemote.com
All Rights Reserved.