2012 Suzuki SX4 Keyless Entry Remote Fob Smart Key Programming Instructions

Call 877-675-1507 for a local Locksmith
Instructions

How to Program a 2012 Suzuki SX4 Keyless Entry Remote Fob Smart Key

Step by Step How to Programming Instructions:
 
Use these instructions if you have the separate key and remote system. 

1. Remove key from ignition switch.

2. Close all doors.

3. Open drivers door

4. Insert key and turn to ON position and within 10 seconds turn key off and remove key.

5. Within 20 seconds Close and open drivers door 3 times.

6. Insert key and turn to ON position and within 10 seconds turn key off and remove key.

7. Locks should now lock and unlock automatically to confirm you have entered programming mode.

8.  Press the UNLOCK button on remote and locks should cycle to confirm programming.

9. Repeat step 8 on each additional remote.

10. Exit vehicle with keys and remote, close door test remote(s).

 
Use these instructions if you have Smart Key System.
There is no onboard programming procedure for this vehicle. This vehicle requires special equipment be connected to the vehicle to program the keyless remote.