2015 Ford Mustang Keyless Entry Remote Fob Smart Key Programming Instructions

Instructions
How to Program a 2015 Ford Mustang Keyless Entry Remote Fob Smart Key
 
Step by Step How to Program Instructions:

Note: Before you start you must have TWO already programmed keys for your vehicle. If you only have one or none programmed keys then you will have to have a locksmith program them for you.
 
 
 1. Remove the rubber covering from the cup holder between front seats. Place the first programmed key in the backup slot at the bottom of the cup holder, then press the push button ignition switch.
 
2.  Wait five seconds and then press the push button ignition switch again.
 
3.  Remove the first key from cup holder.
 
4.  Within 10 seconds, place a second programmed key in the backup slot. Press the push button ignition switch.

5. Wait five seconds and then press the push button ignition switch again.
 
6. Remove the second key from the cup holder.
 
7. Place the new unprogrammed key in the backup slot and press the push button ignition switch.
 
Programming is now complete.
 
Test Remote(s)
 
 
Call (877) 675-1507 to find a Locksmith in your area.