2002 Chevrolet TrailBlazer Keyless Entry Remote Key Fob Programming Instructions

Instructions
How to Program a 2002 Chevrolet TrailBlazer Keyless Entry Remote Fob Smart Key

Step by Step How to Programming Instructions:


1.
Close all vehicle doors.

2. Insert the key into the ignition.

3. Hold down the power UNLOCK button on the driver’s door panel continue to hold down until instructed to release in step 9.

4. Perform steps 5 through 8 in fairly rapid succession.

5. Turn the ignition switch to the ON position (as far as you can go without starting the engine).

6. Turn the ignition switch to the OFF position.

7. Turn the ignition switch to the ON position.

8. Turn the ignition switch to the OFF position.

9. Release the power unlock button on the door panel. The vehicle will lock and unlock the doors automatically.

10. Hold down the LOCK and UNLOCK buttons on the transmitter simultaneously until the door locks and unlocks. This step may take up to 30 seconds.

11. Repeat step 10 NOW for each additional transmitter (including any existing transmitters).

12. Turn the ignition switch to the ON position in order to exit the transmitter programming mode. 

Video
 
Call (877) 675-1507 to find a Locksmith in your area.