2007 Ford Explorer Keyless Entry Remote Fob Programming Instructions

Call 877-675-1507 for a local Locksmith
Instructions
How to Program a 2007 Ford Explorer Keyless Entry Remote Fob

Step by Step How to Program Instructions:


1. Close all doors and then open drivers door and press the UNLOCK button on drivers door panel while door is open and insert key in ignition.  

2. Turn ignition from OFF to RUN 8 times within 10 seconds, with the 8th time ending in RUN. Door locks will cycle to confirm programming mode.

3. Within 20 seconds press any button on first keyless remote.  Door locks will cycle to confirm programming.

4. Within 20 seconds, press any button on second keyless remote.  Door locks will cycle again to confirm programming.

5. Turn ignition to OFF.  Locks will again cycle to indicate end of programming mode.

 
If you want to change to a remote head key. Click Here to Buy 
 
Can I program an ignition key. ProgramAutoKeys.com  
Video