1996 Dodge Ram Keyless Entry Remote Fob Smart Key Programming Instructions

Call 877-675-1507 for a local Locksmith
How to Program a 1996 Dodge Ram Keyless Entry Remote Fob Smart Key
Step by Step How to Programming Instructions: 
1. Locate the keyless entry program line - a dark green wire with a molded 
    plastic insulator on the end. The program line is located under the left side
    of the instrument panel. The wire is taped back to the harness (Left of the 
    steering column near the floor) and terminated with a black rubber mold.3

2. Connect the program line from the Remote Keyless Entry Module to 
    ground with a suitable jumper wire.

3. Insert the key into the ignition and turn ignition switch to the ON position.

4. Press any button on the transmitter to set code. If there is a second
    transmitter it has to be set at this time by pressing any button on the
    second transmitter. The locks will lock and unlock automatically to
    confirm programming.

5. Disconnect the program line from ground, turn ignition off and remove key.