2007 Honda Odyssey Keyless Entry Remote Fob Smart Key Programming Instructions

Instructions
2007 Honda Odyssey Keyless Entry Remote Fob Smart Key Programming Instructions
 
 1. Turn ignition switch to ON (II)
 

 2. Within 4 seconds  press the LOCK or UNLOCK button on one of the remotes.
     Make sure remote is aimed at the receiver near the glove box.

 3. Within 4 seconds turn ignition switch to LOCK (0)

 4. Repeat steps 1, 2 and 3 two more times using the same keyless remote used
     in step 2

 5. Within 4 seconds turn the ignition switch to ON (II)

 6. Within 4 seconds press the LOCK or UNLOCK button the same remote.  Make
     sure the power door locks cycle to confirm you are in programming mode.
     Press the LOCK or UNLOCK button again.

 7. Press the LOCK or UNLOCK button on each remote you want to program. Make
     sure door locks cycle after you push each remote button to confirm system has
     accepted the remote.

  8. Turn the ignition switch to LOCK (0) to exit programming mode.

  9. Test remote(s)

     

 
Call (877) 675-1507 to find a Locksmith in your area.