How to Program a 2007 Dodge Durango Keyless Entry Remote Fob Smart Key
Step by Step How to Programming Instructions:
**This procedure CAN ONLY be used on vehicles built in USA.
**You MUST HAVE two working programmed Remote/keys before you can add a third remote/key.
**If you only have ONE WORKING REMOTE/KEY and want to add a second key this procedure WILL NOT WORK.
1. Using first programmed remote/key turn ignition to the ON position for 5 seconds. (Do not crank engine). Turn remote/key off and remove.
2. Within 5 seconds insert second working programmed remote/key. Turn ignition to the ON position (Do not crank engine) security light will begin to flash and chime will be heard within 10 seconds. Turn remote/key off and remove. NOTE: Some vehicles will not chime, only the security light will flash.
3. Within 5 seconds insert third NEW CUT remote/key and turn ignition to the ON position (Do not crank engine). The security light should start flashing and within 10 seconds you should hear a chime and the security light should go out. Once the security light goes out, the new remote/key should be programmed. Turn remote/key to the OFF position, remove key.
4. Test key and remote.