2009 Hummer H2 Keyless Entry Remote Fob Smart Key Programming Instructions
Use this Procedure for Vehicles with Driver Information Center Buttons
1. Insert Key and turn to ON position so you can access Driver Information Center
2. Press the vehicle information button until PRESS TO RELEARN REMOTE KEY displays
3. Press the set/reset button until REMOTE KEY LEARNING ACTIVE displays
4. Press and hold the lock and unlock buttons on the keyless remote at the same time for approximately 15 seconds. A chime will sound indicating that the remote is programmed.
5. To program additional remotes at this time repeat step 4. This vehicle can have a maximum of eight remotes programmed
6. To exit programming mode turn key off and remove key. Test remote(s).
Can I Program an ignition key for this vehicle?
Click Here ProgramAutoKeys.com